The Kettle House in Texas is very interesting-looking structure. Rumor has it that it was built in the 1950′s, and that it is the top of a silo turned upside down and roofed. This house has survived the great hurricane infected Texas. The great engineering of the house remain to be applauded at it was meant to survive heavy storms and flood.


    Deciding what siding you’d like for your home is a matter of personal taste. Where as some people adore the old rustic look of wood, more people opt for a lower maintenance siding such as vinyl. Deciding how much work you want to dedicate to your siding (with installation and yearly upkeep), your price range, and resale value will determine which type you choose.

    Over the years there have been seven main types of siding which include, wood, asbestos, aluminum, vinyl, hardboard composite, fiberglass, and cement fiber. Throughout the years, it has been whittled down to four major types. Asbestos, because of it’s health risks is no longer used, and fiberglass and hardboard composite are nearly extinct.

    When deciding between wood, aluminum, vinyl and cement fiber, consider the following characteristics of each. Wood siding, although it has a lot of character is a lot of work. Constantly repainting, caulking and keeping pesky insects out of your wood can be an ongoing job. If you do decide to opt for wood, the price will vary based on which wood you choose and the style that you prefer. Hanging wood siding is pretty easy. Clapboard siding has overlapping joints, and board siding usually has grooves that fit into one another.

    Aluminum siding has in many ways replaced wood siding. Many newer homes install aluminum siding because it is relatively low maintenance. Coming in a variety of colors, grains and patterns, aluminum siding offers you the option of “wooden siding” because of it’s variety of textures. Aluminum siding is very easy to hang, arriving in planks you simply interlock the planks together. Prices range from moderately to high if you choose vinyl or plastic coated aluminum. The disadvantages of aluminum siding is that it is prone to denting and fading over time. It is noisy and you lack the flexibility for detailed trim work.

    Vinyl siding, is a low cost and low maintenance siding. It is easy to install with perforated holes that interlock, and like aluminum siding is available in a variety of colors, designs and textures. Although vinyl siding can crack in cold weather if there is an impact, there are few if any repairs other than an occasional break. Since the color is actually in the vinyl, there will never be a need to repaint.

    Cement Fiber Siding, is the most recent siding. It is durable and low maintenance. Although it is slightly more expensive that other options, it does have a 50 year warranty. For environmentally conscious consumers, you will be happy to know it is made out of recycled materials. Cement Fiber siding is almost indistinguishable from natural wood siding since it can match grain and be manipulated into trim and detail just as wood would. The advantage to using Cement Fiber siding is that it has curbside appeal like wood, but is durable, prefinished, does not need to be repainted year after year, and has no problem with insects.


    Sometimes even a simple do-it-yourself can get frustrating and become more involved than the average weekend do-it-yourselfer first thought. Give Mr. Do Right Construction a call. Big or small, complicated or simple, we can do the job you need and we can do it right.




    Hammers are the quintessential tool–likely one of the first tools man invented, and probably one of the first tools you ever picked up. Everyone remembers his dad’s old hammer. After the years go by and the time comes for your father’s hammer to be passed down, there’s no doubt you’ll wear it on your hip with honor and announce to anyone who’ll listen, “This was my dad’s hammer!”

    But now, here comes Craftsman with something called the NEXTEC Hammerhead Auto-Hammer , a battery-powered tool that drives nails by pounding a little piston up to 3600 times per minute. Is this new device poised to replace the traditional hammer.

    Are we looking at a future in which young men proudly announce that they’ve just inherited their father’s Auto-Hammer?

    To put this idea to the test, I pitted the Auto-Hammer head-to-head against my steel Estwing 16-ounce Rip Hammer in a series of challenges.

    Speed Trials

    The parameters of my first test were simple: timing how long it took to drive four 4d 1-1/2-in. galvanized joist hanger nails. For the test, I sent the nails through 1-in.-thick poplar, a softwood, and into standard 2x stock, also pretty soft. I made sure that there were no knots in the testing area that would unfairly slow down the nails.

    Using the trusty old Estwing, I managed to get all four nails embedded in the wood in an uneventful 18 seconds. The Auto-Hammer, on the other hand, had some trouble with the bulky nails. In 43 seconds, I managed to get them all in the wood, but I couldn’t seal the deal with any of the nails; no matter what I tried, the Auto-Hammer got them to a point but left them sticking them out of the wood like little galvanized mushrooms.

    Winner: Estwing

    Speed Trials II

    I then repeated the same test with 2-in. stainless-steel ring-shank nails. Showing that at the very least, I’m consistent, I again pounded all four nails in 18 seconds. The Auto-Hammer fared much better with the smaller nails, and I managed to drive them all flush with the wood in 41 seconds. It took over twice as long as with the regular hammer, but the end results were the same.

    Winner: Estwing

    Thumb Trial

    There is a certain, specific agony associated with hitting your thumb with a hammer. I’m never sure which is worse–the sheer pain, or the self-loathing, “I can’t believe I just did that,” humiliation. Or, as the Auto-Hammer ad puts it: “When a man misses a nail, the only thing bruised more than his thumb is his ego.” It’s a rite of passage, and it certainly happens to us all. But I think I’m one of the few to have done it on purpose.

    For this test, I positioned the head of the Estwing about 10 in. above my thumb. Then, I let gravity do the rest. There’s no need to detail the words that came out of my mouth upon impact. Even with that little bit of swing, the hit was truly painful. I switched hands, then pressed the nose of the Auto-Hammer against my other thumb and pulled the trigger. While the impact of the piston did sting quite a bit, it didn’t extend into a 5-minute throb like the hammer hit did.
    T here are two things worth noting here: 1) The Auto-Hammer is designed so that it’s really difficult to get your fingers in the way of the piston during operation. 2) The hit with the Estwing was very minor compared to what would have happened had I been actually swinging with any force.

    Winner: Auto-Hammer

    Visibility Trial

    I then took the hammers into a closet to pound a few nails in the dark. The Auto-Hammer comes equipped with an LED that lights up the work area, so it wasn’t a problem driving a nail in the closet’s limited visibility and maneuverability. Thinking back to the painful thumb trial, I decided it was best not to perform the visibility trial with the Estwing and, by default, declared the Auto-Hammer the winner.

    Winner: Auto-Hammer


    The Auto-Hammer is a nice tool, and certainly has its uses in dimly lit, cramped spaces. But when it comes to overall nail-pounding action, it can’t compare with the traditional hammer.


    Make Homes, Not War!

    Can your home survive a direct nuclear strike? This one can. Made from a decommissioned missile silo in upstate New York, it’s one of the strongest structures ever built. The 2,300-sq.-ft., below-ground portion includes a full kitchen, entertainment center, and two private suites. Entrance is gained via an 1,800-sq.-ft. log home on the surface, and there’s a private runway. Buy-in price? About $750,000.


    When you’re hiring a general contractor to do home improvements, you have to make sure the one you hire is right for you. Read this first and get yourself informed.



    This upcoming Friday falls on the 13th, so the following are some interesting fun facts and trivia about how the superstition got started and the ones that follow it.

    1–Friggatriskaidekaphobia is when someone is afraid of Friday the 13th. Nearly 20 million Americans are affected by friggatriskaidekaphobia. It’s also called paraskavedekatriaphobia. Being afraid of No. 13 is called triskaidekaphobia.

    3–Part of the reason 13 got a bad rap is because it comes after 12, which is a number of “completeness.” For example: 12 months in a year, 12 hours in a clock, 12 God of Olympus, 12 Zodiac signs, 12 tribes of Israel, 12 days of Christmas, 12 labors of Hercules, 12 Apostles of Jesus and 12 eggs in a dozen.

    4–Many hospitals don’t have a room number with 13 in it as well as a 13th floor. The same thing goes for tall buildings. Normally the 13th floor is skipped. Some airlines omit Gate 13.

    5–A 13th guest at a table is considered unlucky, and in Paris sometimes a quatorzieme is hired to be a professional 14th guest and balance out the luck.

    6–There is at least one Friday the 13th in every year, and at the most there are three.

    7–Hollywood has capitalized on the Friday the 13th superstitions. Four of the 12 movies released were done so on Friday the 13th.

    8–Tupac Shakur was killed on Friday the 13th.

    9–Fidel Castro was born on Friday, Aug. 13, 1956.

    10–Butch Cassidy, who was an infamous American train and bank robber, was born on Friday, April 13, 1866.

    11–President Franklin D. Roosevelt would never have a 13th guest at a meal, nor would he travel on the 13th day of any month.

    12– The number 13 is considered lucky by Italians

    13– Dan Marino, former NFL quarterback of the Miami Dolphins, is considered one of the greats QBs by some, and he wore the number 13.

    13– Taylor Swift considers 13 her lucky number and used to paint 13 on her hand.

  • Welcome to Mr. Do Right Construction’s blog

    Welcome to our new blog!